{
  "opening": "Most PETG prints between 220 and 250 °C (428–482 °F); listed products range from 195 to 295 °C (383–563 °F). Most PETG beds are listed at 70–90 °C (158–194 °F), across 257 products with a bed temperature; listed beds span 40–110 °C (104–230 °F).",
  "question": "What temperature settings should I use for PETG?",
  "slug": "petg_temp",
  "useCase": "petg",
  "useCaseLabel": "PETG",
  "updated": "2026-10-21",
  "shortAnswer": "Use the nozzle and bed on the PETG spool you loaded. The comments here are about a bad temperature tower, drafts, one person who never runs the fan, and support scars. They do not publish a single PETG setpoint.",
  "recommendedMaterials": [
    "petg"
  ],
  "printerConsiderations": [
    "It is already labeled as community process on the PETG print page. It is not these four rows.",
    "Beds do not match. PETG HF is 65–75 °C (149–167 °F). PrimaSelect PETG is 70–80 °C (158–176 °F). SUNLU PETG is 60–70 °C (140–158 °F). Prusament PETG is 70–90 °C (158–194 °F).",
    "A comment that never cools PETG is that comment. Fan percent stays on the cooling page."
  ],
  "pros": [
    "Four PETG rows have a manufacturer nozzle and bed, and they are not averaged into one profile.",
    "The tower, draft, fan, and support comments are quoted instead of turned into settings."
  ],
  "cons": [
    "The support comment describes a scar. It does not give a nozzle temperature."
  ],
  "community": "",
  "related": [
    "petg_print",
    "warping",
    "cooling",
    "supports",
    "pla_temp"
  ],
  "faq": [
    {
      "q": "What temperature settings should I use for PETG?",
      "a": "Most PETG prints between 220 and 250 °C (428–482 °F); listed products range from 195 to 295 °C (383–563 °F). Most PETG beds are listed at 70–90 °C (158–194 °F), across 257 products with a bed temperature; listed beds span 40–110 °C (104–230 °F)."
    },
    {
      "q": "Is 230–250 °C (446–482 °F) the PETG nozzle?",
      "a": "Bambu PETG HF lists 230–260 °C (446–500 °F). PrimaSelect PETG lists 225–245 °C (437–473 °F). SUNLU PETG and Prusament PETG each list 240–260 °C (464–500 °F). Load the row that matches the spool."
    }
  ],
  "sources": [
    {
      "title": "Bambu Lab PETG HF technical data sheet",
      "url": "https://store.bblcdn.com/ce12d65176a94f1086e6aefa238e62e2.pdf",
      "kind": "datasheet"
    },
    {
      "title": "PrimaSelect PETG product page",
      "url": "https://primacreator.com/products/primaselect-petg",
      "kind": "manufacturer"
    },
    {
      "title": "SUNLU PETG product page",
      "url": "https://www.sunlu.com/products/petg-3d-printing-filament",
      "kind": "manufacturer"
    },
    {
      "title": "Prusament PETG technical data sheet",
      "url": "https://www.prusa3d.com/file/3464616/prusament-petg-technical-data-sheet.pdf",
      "kind": "datasheet"
    }
  ],
  "recommendations": [
    {
      "rank": 1,
      "note": "Bambu PETG HF lists a nozzle of 230–260 °C (446–500 °F), a bed of 65–75 °C (149–167 °F), and drying at 65 °C (149 °F) for 8 h on the technical data sheet checked 15 October 2026.",
      "brand": "Bambu Lab",
      "product": "PETG HF",
      "material": "PETG",
      "url": "/brand/bambu-lab/petg-hf",
      "nozzle": "230–260 °C (446–500 °F)",
      "bed": "65–75 °C (149–167 °F)",
      "pricePerKg": null,
      "datasheetUrl": "https://store.bblcdn.com/ce12d65176a94f1086e6aefa238e62e2.pdf",
      "affiliateUrl": null
    },
    {
      "rank": 2,
      "note": "PrimaSelect PETG product page checked 20 October 2026. Nozzle 225–245 °C (437–473 °F) and bed 70–80 °C (158–176 °F). It is inside this nozzle and it is not this page's setpoint.",
      "brand": "PrimaCreator",
      "product": "Primaselect PETG",
      "material": "PETG",
      "url": "/brand/primacreator/primaselect-petg",
      "nozzle": "225–245 °C (437–473 °F)",
      "bed": "70–80 °C (158–176 °F)",
      "pricePerKg": null,
      "datasheetUrl": null,
      "affiliateUrl": null
    },
    {
      "rank": 3,
      "note": "SUNLU PETG product page checked 19 October 2026. The parameter table lists nozzle 240–260 °C (464–500 °F) and bed 60–70 °C (140–158 °F). Catalog drying is 60–65 °C (140–149 °F) for 6–8 h. A title that prints at 240 °C (464 °F) sits at the bottom of this nozzle.",
      "brand": "SUNLU",
      "product": "PETG",
      "material": "PETG",
      "url": "/brand/sunlu/petg",
      "nozzle": "240–260 °C (464–500 °F)",
      "bed": "60–70 °C (140–158 °F)",
      "pricePerKg": null,
      "datasheetUrl": null,
      "affiliateUrl": null
    },
    {
      "rank": 4,
      "note": "Prusament PETG technical data sheet. Nozzle 240–260 °C (464–500 °F) and bed 70–90 °C (158–194 °F). The sheet is the range. The title is one print.",
      "brand": "Prusament",
      "product": "PETG",
      "material": "PETG",
      "url": "/brand/prusament/petg",
      "nozzle": "240–260 °C (464–500 °F)",
      "bed": "70–90 °C (158–194 °F)",
      "pricePerKg": null,
      "datasheetUrl": "https://www.prusa3d.com/file/3464616/prusament-petg-technical-data-sheet.pdf",
      "affiliateUrl": null
    }
  ]
}