# What filament gives the most detail on FDM?

For the most FDM detail, print matte PLA through a 0.2–0.25 mm nozzle at a low layer height. Resin still wins on tiny parts. Bambu PLA Matte lists 0.2 mm as one of its nozzle sizes.

FDM detail is a nozzle and a layer height first. The filament the consensus names on top of that is matte PLA. A resin printer is still the route when the part is tiny.

## Nozzle before brand

Use a 0.2–0.25 mm nozzle and a low layer height. [Bambu PLA Matte](/brand/bambu-lab/pla-matte) lists 0.2, 0.4, 0.6, and 0.8 mm on TDS V3.0. The other matte rows do not store a minimum nozzle diameter. Do not assume ELEGOO, SUNLU, or eSUN copied that list.

The [miniatures guide](/answers/miniatures) is the same idea for 28 mm models: PLA, and a nozzle smaller than 0.4 mm if the detail is the point.

## What the matte sheet actually lists

TDS V3.0 for Bambu PLA Matte says the filament has a matte finish, lists a nozzle of 190–230 °C (374–446 °F), a bed of 35–45 °C (95–113 °F), drying in a blast oven at 50 °C (122 °F) for 8 h, and a print speed under 300 mm/s. The catalog row still stores a bed of 50–70 °C (122–158 °F) from the Open Filament Database. The table on this page shows the catalog cell. Print from the sheet.

How that sheet differs from PLA Basic is written up on [is matte PLA worth it](/answers/matte). This page does not repeat those specimen numbers as a detail ranking.

## Resin

The consensus is that resin still wins for tiny parts. This catalog does not list resins. If the goal is a display miniature with no layer lines, FDM matte PLA is the filament answer and it is still FDM.

## Where this sits in the catalog

[PLA](/material/pla) is the material. [How do I get good PLA prints](/answers/pla_print) covers the first layer, which matters more than a 0.2 mm nozzle if the part will not stick. Silk is the wrong surface for this question: [silk PLA](/answers/silk).

Updated 2026-10-15. Sources accessed 2026-10-15. Use case: Miniatures.

## Ranked filaments

| Rank | Filament | Nozzle | Bed | Price per kg |
| --- | --- | --- | --- | --- |
| 1 | Bambu Lab PLA Matte | 190–230 °C (374–446 °F) | 50–70 °C (122–158 °F) | — |
| 2 | ELEGOO PLA MATTE | 190–230 °C (374–446 °F) | 50–70 °C (122–158 °F) | — |
| 3 | SUNLU PLA Matte | 190–230 °C (374–446 °F) | 50–70 °C (122–158 °F) | — |
| 4 | eSUN 3D PLA-Matte | 190–230 °C (374–446 °F) | 50–70 °C (122–158 °F) | — |

## What the community says

The consensus for this cluster is to use a 0.2–0.25 mm nozzle, a low layer height, and matte PLA for fine FDM detail, and that resin still wins for tiny parts.

## Sources

- [Bambu PLA Matte technical data sheet V3.0](https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Matte_Technical_Data_Sheet_60a941f9-8495-48ec-b1b0-52e07ff0f4c2.pdf?v=1734060943) (datasheet)
- [Community source, r/3Dprinting 1frhu4s](https://www.reddit.com/r/3Dprinting/comments/1frhu4s/) (reddit)
- [Community source, r/BambuLab 17jwd4e](https://www.reddit.com/r/BambuLab/comments/17jwd4e/) (reddit)
- [Community source, r/FixMyPrint vigu5c](https://www.reddit.com/r/FixMyPrint/comments/vigu5c/) (reddit)
- [Community source, r/prusa3d 13ckz2q](https://www.reddit.com/r/prusa3d/comments/13ckz2q/) (reddit)
- [Community source, r/3Dprinting se46uc](https://www.reddit.com/r/3Dprinting/comments/se46uc/) (reddit)

HTML: https://filamentfacts.com/answers/high_detail