{
  "opening": "A 50 °C (122 °F) dryer can dry 19 of 236 filaments in our data, mostly PLA. A filament counts when the maker's drying maximum is at or below that dryer.",
  "question": "What filament dryer should I buy?",
  "slug": "dryer_reco",
  "useCase": "drying",
  "useCaseLabel": "Drying",
  "updated": "2026-10-25",
  "shortAnswer": "Match the dryer to the hottest spool you will dry: Bambu PLA Basic lists blast-oven drying at 50 °C (122 °F) for 8 hours, PolyLite PLA lists 55 °C (131 °F) for 6 hours, and Fiberon PA6-CF20 lists 100 °C (212 °F) for 10 hours. This catalog has no dryer to rank. One comment names a Sunlu S4 and says it can feed a printer. Another uses a round food dehydrator and printed spacers. A third says PETG needs active drying. None of those comments states the dryer's maximum temperature.",
  "recommendedMaterials": [
    "pla",
    "petg",
    "pa-cf"
  ],
  "printerConsiderations": [
    "Match the dryer's stated maximum to the spool you actually dry. 50 °C (122 °F) covers the Bambu PLA blast-oven line. It does not cover Fiberon PA6-CF20 at 100 °C (212 °F).",
    "A closed box that cannot let moisture out is the complaint on the oven page, not a product pick.",
    "Printing from the dryer is what the Sunlu S4 comment says that model can do. This catalog does not store a roller count or a wattage for it."
  ],
  "pros": [
    "The only product name in the quotes is kept as a quote. It is not turned into a filament id.",
    "The three drying temperatures are the makers' drying instructions, with the dates they were checked."
  ],
  "cons": [
    "They are not in these four comments, and this catalog has no page for them.",
    "No comments states a dryer setpoint in degrees."
  ],
  "community": "",
  "related": [
    "drying",
    "storage",
    "hygro",
    "oven_dry"
  ],
  "faq": [
    {
      "q": "What filament dryer should I buy?",
      "a": "A 50 °C (122 °F) dryer can dry 19 of 236 filaments in our data, mostly PLA. A filament counts when the maker's drying maximum is at or below that dryer."
    },
    {
      "q": "What temperature should the dryer reach?",
      "a": "Use the maker's drying instructions for that spool. Bambu PLA Basic lists 50 °C (122 °F) for 8 h in a blast oven. PolyLite PLA lists 55 °C (131 °F) for 6 h. Fiberon PA6-CF20 lists 100 °C (212 °F) for 10 h. Those three are not a single setpoint."
    }
  ],
  "sources": [
    {
      "title": "Bambu PLA Basic technical data sheet",
      "url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Technical_Data_Sheet_bf3411ce-be39-4db7-9669-1b4671d2196b.pdf?v=1734060943",
      "kind": "datasheet"
    },
    {
      "title": "Polymaker PolyLite PLA product page",
      "url": "https://us.polymaker.com/products/polylite-pla",
      "kind": "manufacturer"
    },
    {
      "title": "Fiberon PA6-CF20 TDS V1.1",
      "url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/TDS_FIBERON_PA6-CF20_V1.1_EN.pdf",
      "kind": "datasheet"
    }
  ],
  "recommendations": [
    {
      "rank": 1,
      "note": "Bambu PLA Basic technical data sheet, checked 14 October 2026, lists blast-oven drying at 50 °C (122 °F) for 8 h. The same sheet also lists the X1 heatbed at 60–70 °C (140–158 °F) for 12 h. A dryer that cannot hold 50 °C (122 °F) does not meet this row.",
      "brand": "Bambu Lab",
      "product": "PLA Basic",
      "material": "PLA",
      "url": "/brand/bambu-lab/pla-basic",
      "nozzle": "190–230 °C (374–446 °F)",
      "bed": "35–45 °C (95–113 °F)",
      "pricePerKg": null,
      "datasheetUrl": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Technical_Data_Sheet_bf3411ce-be39-4db7-9669-1b4671d2196b.pdf?v=1734060943",
      "affiliateUrl": null
    },
    {
      "rank": 2,
      "note": "The US product page checked 14 October 2026 lists drying at 55 °C (131 °F) for 6 h. Nozzle on the database cell is 190–230 °C (374–446 °F). The bed on that page is 25–60 °C (77–140 °F).",
      "brand": "Polymaker",
      "product": "Polylite PLA",
      "material": "PLA",
      "url": "/brand/polymaker/polylite-pla",
      "nozzle": "190–230 °C (374–446 °F)",
      "bed": "25–60 °C (77–140 °F)",
      "pricePerKg": null,
      "datasheetUrl": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PLA_TDS_EN_V5.4.pdf",
      "affiliateUrl": null
    },
    {
      "rank": 3,
      "note": "Fiberon PA6-CF20 TDS V1.1, checked 21 October 2026, lists drying at 100 °C (212 °F) for 10 h, a nozzle of 280–300 °C (536–572 °F), and a bed of 40–50 °C (104–122 °F). A dryer sold only for PLA temperatures does not meet this row.",
      "brand": "Fiberon",
      "product": "PA6-CF20",
      "material": "PA/CF",
      "url": "/brand/fiberon/pa6-cf20",
      "nozzle": "280–300 °C (536–572 °F)",
      "bed": "40–50 °C (104–122 °F)",
      "pricePerKg": null,
      "datasheetUrl": null,
      "affiliateUrl": null
    }
  ]
}