# How long and at what temp should I dry PETG?

Dry PETG at 55–70 °C (131–158 °F) for 3–10 hours; median 62.5 °C (145 °F) across 28 official tables.

1. The first sentence is the span and the median of the official tables it names. It is not a new setpoint.
2. Stay inside that published temperature span and that published time span. The median is the middle of those tables.
3. Use the product row in the table before you start. One brand can sit at either end of the range.

Anycubic | 1 | 60 °C (140 °F) | 55–65 °C (131–149 °F)
Bambu Lab | 3 | 65 °C (149 °F) | 65 °C (149 °F)
Creality | 1 | 65 °C (149 °F) | 65 °C (149 °F)
Dancyn 3D Prints | 1 | 65 °C (149 °F) | 65 °C (149 °F)
ELEGOO | 6 | 60 °C (140 °F) | 55–65 °C (131–149 °F)
eSUN | 2 | 60 °C (140 °F) | 60 °C (140 °F)
Flashforge | 1 | 70 °C (158 °F) | 70 °C (158 °F)
Overture | 1 | 65 °C (149 °F) | 65 °C (149 °F)
Polymaker | 5 | 65 °C (149 °F) | 55–65 °C (131–149 °F)
Prusament | 1 | 55 °C (131 °F) | 55 °C (131 °F)
QIDI Tech | 3 | 62.5 °C (145 °F) | 55–65 °C (131–149 °F)
SUNLU | 3 | 62.5 °C (145 °F) | 60–65 °C (140–149 °F)

Updated 2026-10-25. Sources accessed 2026-10-25. Use case: Drying.

## Ranked filaments

| Rank | Filament | Nozzle | Bed | Price per kg |
| --- | --- | --- | --- | --- |
| 1 | Polymaker Polylite PETG | 220–250 °C (428–482 °F) | 70–90 °C (158–194 °F) | — |
| 2 | Bambu Lab PETG HF | 230–260 °C (446–500 °F) | 65–75 °C (149–167 °F) | — |
| 3 | ELEGOO RAPID PETG | 240–270 °C (464–518 °F) | 65–75 °C (149–167 °F) | — |

## Sources

- [Polymaker PolyLite PETG technical data sheet](https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PETG_TDS_EN_V5.4.pdf) (datasheet)
- [Bambu Lab PETG HF technical data sheet](https://store.bblcdn.com/ce12d65176a94f1086e6aefa238e62e2.pdf) (datasheet)
- [ELEGOO Rapid PETG 1 kg product page](https://us.elegoo.com/products/rapid-petg-filament-1-75mm-colored-1kg) (manufacturer)
- [SUNLU wiki, PETG](https://www.sunlu.com/wiki/61) (manufacturer)
- [Prusa Knowledge Base, drying filament](https://help.prusa3d.com/article/drying-filament_332086) (manufacturer)

HTML: https://filamentfacts.com/answers/dry_petg