# Which filament is chemical, oil, or gas resistant?

The comments supplied for this question do not test oil, fuel, or a solvent. Those are the catalog rows below, and none of them publishes a chemical-resistance table here.

The comments supplied for this question do not test oil, fuel, or a solvent. Those are the catalog rows below, and none of them publishes a chemical-resistance table here.

Nothing in the supplied comments is a chemical test. The rows below are those materials' print settings. They are not a resistance chart.
## What the comments actually say

[a Reddit thread in r/3Dprinting](https://www.reddit.com/r/3Dprinting/comments/t81zr7/): "Depends on the thickness of the fiberglass. Better to use it to make a mould and use that for fiberglass. That way you don't have melting stuff inside."

[a Reddit thread in r/3Dprinting](https://www.reddit.com/r/3Dprinting/comments/t81zr7/): "There is a guy on YouTube (lasersterling) that built an entire Lamborghini replica body with this method. Seem like he didn’t have many issues but time will tell."

[a Reddit thread in r/FixMyPrint](https://www.reddit.com/r/FixMyPrint/comments/17q14oy/): "Try two-part epoxy. Cyanoacrylate glue does that."

## The rows the summary names

[SUNLU PP](/brand/sunlu/pp) lists a nozzle of 210–230 °C (410–446 °F) on the product page checked 20 October 2026. The bed cell is empty. [PP](/material/pp) is the material hub. [SUNLU](/brand/sunlu) is the brand index.

[PrimaSelect PETG](/brand/primacreator/primaselect-petg) lists 225–245 °C (437–473 °F) and a bed of 70–80 °C (158–176 °F) on the product page checked 20 October 2026. How to print PETG is [good PETG prints](/answers/petg_print). [PETG](/material/petg) is the hub. [PLA versus PETG](/answers/pla_vs_petg) is the functional-part split, which is not a chemical ranking.

[Overture Easy Nylon](/brand/overture/easy-nylon) stores 245–260 °C (473–500 °F) and a bed of 50 °C (122 °F) from the Open Filament Database. Drying at 95 °C (203 °F) for 7 h is the product-page field checked 17 October 2026. [Nylon](/answers/nylon) is the print process. [PA6](/material/pa6) is the material page. [Overture](/brand/overture) is the brand index.
## What this is not

A printed part that touches food is [food contact](/answers/food-contact). Prusa's article there is about the printed object, not about gasoline.

Updated 2026-10-21. Sources accessed 2026-10-21. Use case: Troubleshooting.

## Ranked filaments

| Rank | Filament | Nozzle | Bed | Price per kg |
| --- | --- | --- | --- | --- |
| 1 | SUNLU PP | 210–230 °C (410–446 °F) | — | — |
| 2 | PrimaCreator Primaselect PETG | 225–245 °C (437–473 °F) | 70–80 °C (158–176 °F) | — |
| 3 | Overture Easy Nylon | 245–260 °C (473–500 °F) | 50 °C (122 °F) | — |

## Sources

- [SUNLU PP product page](https://store.sunlu.com/products/sunlu-pp-polypropylene-3d-printer-filament-800g) (manufacturer)
- [PrimaSelect PETG product page](https://primacreator.com/products/primaselect-petg) (manufacturer)
- [Overture Easy Nylon product page](https://overture3d.com/products/easy-nylon-filament) (manufacturer)
- [Open Filament Database, Overture Easy Nylon](https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PA6/filaments/easy_nylon/index.json) (other)
- [a Reddit thread in r/BambuLab](https://www.reddit.com/r/BambuLab/comments/1vhz6bb/) (reddit)
- [a Reddit thread in r/3Dprinting](https://www.reddit.com/r/3Dprinting/comments/t81zr7/) (reddit)
- [a Reddit thread in r/FixMyPrint](https://www.reddit.com/r/FixMyPrint/comments/17q14oy/) (reddit)
- [a Reddit thread in r/3Dprinting](https://www.reddit.com/r/3Dprinting/comments/s3e3gn/) (reddit)
- [a Reddit thread in r/3Dprinting](https://www.reddit.com/r/3Dprinting/comments/1kn6rkr/) (reddit)

HTML: https://filamentfacts.com/answers/chemical