{
  "opening": "The comments supplied for this question do not test oil, fuel, or a solvent. Those are the catalog rows below, and none of them publishes a chemical-resistance table here.",
  "question": "Which filament is chemical, oil, or gas resistant?",
  "slug": "chemical",
  "useCase": "troubleshooting",
  "useCaseLabel": "Troubleshooting",
  "updated": "2026-10-21",
  "shortAnswer": "The comments supplied for this question do not test oil, fuel, or a solvent. Those are the catalog rows below, and none of them publishes a chemical-resistance table here.",
  "recommendedMaterials": [
    "pp",
    "petg",
    "pa6"
  ],
  "printerConsiderations": [
    "A part that touches food is the food-contact page. Chemical resistance and food contact are different questions, and this catalog does not treat one as the other.",
    "SUNLU PP has no bed temperature on the row. Do not copy PrimaSelect PETG's 70–80 °C (158–176 °F) bed onto it.",
    "Easy Nylon's drying line is 95 °C (203 °F) for 7 h. That is this spool. The nylon page is the rest of the process."
  ],
  "pros": [
    "The three ranked rows exist, and each temperature is tied to a product page or the Open Filament Database.",
    "The glue and fiberglass comments are quoted as written, including the stew joke."
  ],
  "cons": [
    "No comments in this bank measures resistance to oil, gasoline, or MEK."
  ],
  "community": "The editorial summary says PP and PETG have good chemical resistance, nylon resists oils and fuels, and PLA is poor. None of that is in the excerpts. r/BambuLab 1vhz6bb, score 29: \"*FIL-A-MENTS* Dry it, seal it, stick it in a stew\". r/3Dprinting t81zr7, score 40: \"Depends on the thickness of the fiberglass. Better to use it to make a mould and use that for fiberglass. That way you don't have melting stuff inside.\" Score 10 on that thread names a YouTube Lamborghini body and says time will tell. r/FixMyPrint 17q14oy, score 47: \"Try two-part epoxy. Cyanoacrylate glue does that.\" No excerpt was supplied for r/3Dprinting s3e3gn or r/3Dprinting 1kn6rkr.",
  "related": [
    "food-contact",
    "petg_print",
    "nylon",
    "pla_vs_petg"
  ],
  "faq": [
    {
      "q": "Which filament is chemical, oil, or gas resistant?",
      "a": "The comments supplied for this question do not test oil, fuel, or a solvent. Those are the catalog rows below, and none of them publishes a chemical-resistance table here."
    },
    {
      "q": "Do these comments say PP, PETG, or nylon resists oil or gasoline?",
      "a": "No. The supplied comments are a stew joke, a fiberglass mould suggestion, a Lamborghini-body aside, and a switch from cyanoacrylate to two-part epoxy."
    },
    {
      "q": "Where is the MEK question?",
      "a": "The food-contact page is the neighboring limit this catalog does document."
    }
  ],
  "sources": [
    {
      "title": "SUNLU PP product page",
      "url": "https://store.sunlu.com/products/sunlu-pp-polypropylene-3d-printer-filament-800g",
      "kind": "manufacturer"
    },
    {
      "title": "PrimaSelect PETG product page",
      "url": "https://primacreator.com/products/primaselect-petg",
      "kind": "manufacturer"
    },
    {
      "title": "Overture Easy Nylon product page",
      "url": "https://overture3d.com/products/easy-nylon-filament",
      "kind": "manufacturer"
    },
    {
      "title": "Open Filament Database, Overture Easy Nylon",
      "url": "https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PA6/filaments/easy_nylon/index.json",
      "kind": "other"
    },
    {
      "title": "Community source, r/BambuLab 1vhz6bb",
      "url": "https://www.reddit.com/r/BambuLab/comments/1vhz6bb/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/3Dprinting t81zr7",
      "url": "https://www.reddit.com/r/3Dprinting/comments/t81zr7/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/FixMyPrint 17q14oy",
      "url": "https://www.reddit.com/r/FixMyPrint/comments/17q14oy/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/3Dprinting s3e3gn",
      "url": "https://www.reddit.com/r/3Dprinting/comments/s3e3gn/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/3Dprinting 1kn6rkr",
      "url": "https://www.reddit.com/r/3Dprinting/comments/1kn6rkr/",
      "kind": "reddit"
    }
  ],
  "recommendations": [
    {
      "rank": 1,
      "note": "SUNLU PP product page checked 20 October 2026. Nozzle 210–230 °C (410–446 °F). The bed is blank on the row. The page check does not state a chemical-resistance figure.",
      "brand": "SUNLU",
      "product": "PP",
      "material": "PP",
      "url": "/brand/sunlu/pp",
      "nozzle": "210–230 °C (410–446 °F)",
      "bed": null,
      "pricePerKg": null,
      "datasheetUrl": null,
      "affiliateUrl": null
    },
    {
      "rank": 2,
      "note": "PrimaSelect PETG product page checked 20 October 2026. Nozzle 225–245 °C (437–473 °F) and bed 70–80 °C (158–176 °F). That page is a print-temperature source, not a solvent test.",
      "brand": "PrimaCreator",
      "product": "Primaselect PETG",
      "material": "PETG",
      "url": "/brand/primacreator/primaselect-petg",
      "nozzle": "225–245 °C (437–473 °F)",
      "bed": "70–80 °C (158–176 °F)",
      "pricePerKg": null,
      "datasheetUrl": null,
      "affiliateUrl": null
    },
    {
      "rank": 3,
      "note": "Overture Easy Nylon stores a nozzle of 245–260 °C (473–500 °F) and a bed of 50 °C (122 °F) from the Open Filament Database. The product page checked 17 October 2026 is the drying field source, 95 °C (203 °F) for 7 h. No oil or fuel result is stored.",
      "brand": "Overture",
      "product": "Easy Nylon",
      "material": "PA6",
      "url": "/brand/overture/easy-nylon",
      "nozzle": "245–260 °C (473–500 °F)",
      "bed": "50 °C (122 °F)",
      "pricePerKg": null,
      "datasheetUrl": null,
      "affiliateUrl": null
    }
  ]
}