{
  "opening": "These PLA rows list 190–230 °C (374–446 °F).",
  "question": "Is Polymaker filament good?",
  "slug": "brand_polymaker",
  "useCase": "troubleshooting",
  "useCaseLabel": "Troubleshooting",
  "updated": "2026-10-18",
  "shortAnswer": "The threads print Polymaker on a Bambu and a Prusa and then argue about speed, a profile, and extrusion. PolyLite PLA lists 190–230 °C (374–446 °F) and a 25–60 °C (77–140 °F) bed. PolyTerra is a name in the comments and is not its own catalog row.",
  "recommendedMaterials": [
    "pla"
  ],
  "printerConsiderations": [
    "On r/BambuLab 11nz8q3 the score-9 comment says slow the outer wall for gloss and speed it up for matte, and writes 50–100ms. A score-3 comment says set outer wall to 100ms and that speed changes the finish more than temperature does for PLA. Those units are the comments.",
    "On r/BambuLab 1kdorkc the score-7 comment says use the PolyTerra profile included in Bambu Studio. A score-5 comment says PolyTerra is softer than Bambu Matte PLA and is not 100% PLA. Another score-5 comment says people assume the two are the same spool. The comments disagree.",
    "On r/prusa3d 10dalhw PolyTerra matte looks rough next to grey Prusament PLA. The score-10 comment prints PolyTerra smooth unless extrusion is inconsistent, and has fixed that with a cold pull and a new nozzle."
  ],
  "pros": [
    "PolyLite PLA has a manufacturer nozzle, bed, speed, and fan instruction on the product page.",
    "The enclosure thread's score-27 and score-10 comments report PLA enclosure parts still fine years later, in a room the score-27 comment caps at 100f."
  ],
  "cons": [
    "PolyTerra is the product name in three threads, and this catalog has no PolyTerra slug. Do not point the profile advice at Polymaker PLA and call them the same row.",
    "The marble comparison is a visual preference at one layer height. It is not a strength result. The marble page is the fill question."
  ],
  "community": "r/BambuLab 1cu7jlc prints Bambu marble and Polymaker marble at 0.3 mm layers with a 0.6 mm nozzle on a P1S. The poster prefers Polymaker's fewer dark fragments and matte surface. The score-37 comment prefers white matte PLA. r/prusa3d 1107u40 asks about Polymaker PLA Pro for an enclosure the instructions specify in PETG. The score-27 comment used black PLA for three years under 100f. r/BambuLab 1kdorkc is a first PolyTerra spool on an A1. Comments say use the included profile, and they disagree on whether PolyTerra is Bambu Matte. r/prusa3d 10dalhw is a rough PolyTerra surface beside Prusament. The score-10 comment blames extrusion. r/BambuLab 11nz8q3 is gloss on the lower half of PolyLite PLA Pro. Comments blame outer-wall speed.",
  "related": [
    "brand_prusament",
    "matte",
    "profiles",
    "p1s_filament",
    "metal_fill"
  ],
  "faq": [
    {
      "q": "What speed does PolyLite PLA list?",
      "a": "40–60 mm/s on the Polymaker product page, with the fan on, a nozzle of 190–230 °C (374–446 °F), and a bed of 25–60 °C (77–140 °F). The X1C gloss comments write 50–100ms for the outer wall. That unit is the comment, not the product page."
    },
    {
      "q": "Is PolyTerra the same as Bambu Matte PLA?",
      "a": "r/BambuLab 1kdorkc has both claims. One score-5 comment says they are widely assumed to be the same. Another score-5 comment says PolyTerra is softer and is not 100% PLA. This catalog does not have a PolyTerra row to settle it."
    }
  ],
  "sources": [
    {
      "title": "Polymaker PolyLite PLA",
      "url": "https://shop.polymaker.com/products/polylite-pla",
      "kind": "manufacturer"
    },
    {
      "title": "Polymaker PLA Pro technical data sheet",
      "url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/TDS_Polymaker_PLA_Pro_v6.0_2026-01-26_EN.pdf",
      "kind": "datasheet"
    },
    {
      "title": "Open Filament Database, Polymaker PLA",
      "url": "https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/pla/index.json",
      "kind": "other"
    },
    {
      "title": "Open Filament Database, Polymaker PLA Pro",
      "url": "https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/polymaker_pla_pro/index.json",
      "kind": "other"
    },
    {
      "title": "Community source, r/BambuLab 1cu7jlc",
      "url": "https://www.reddit.com/r/BambuLab/comments/1cu7jlc/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/prusa3d 1107u40",
      "url": "https://www.reddit.com/r/prusa3d/comments/1107u40/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/BambuLab 1kdorkc",
      "url": "https://www.reddit.com/r/BambuLab/comments/1kdorkc/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/prusa3d 10dalhw",
      "url": "https://www.reddit.com/r/prusa3d/comments/10dalhw/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/BambuLab 11nz8q3",
      "url": "https://www.reddit.com/r/BambuLab/comments/11nz8q3/",
      "kind": "reddit"
    }
  ],
  "recommendations": [
    {
      "rank": 1,
      "note": "The Polymaker product page lists a nozzle of 190–230 °C (374–446 °F), a bed of 25–60 °C (77–140 °F), a speed of 40–60 mm/s, and the fan on. It also says the spools are AMS compatible. r/BambuLab 1g1h5qo's score-157 comment names PolyLite for non-matte filament. That thread is cited on the Bambu filament page.",
      "brand": "Polymaker",
      "product": "Polylite PLA",
      "material": "PLA",
      "url": "/brand/polymaker/polylite-pla",
      "nozzle": "190–230 °C (374–446 °F)",
      "bed": "25–60 °C (77–140 °F)",
      "pricePerKg": null,
      "datasheetUrl": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PLA_TDS_EN_V5.4.pdf",
      "affiliateUrl": null
    },
    {
      "rank": 2,
      "note": "Polymaker PLA Pro lists a nozzle of 210–230 °C (410–446 °F) and a bed of 30–60 °C (86–140 °F) in the Open Filament Database. The row links a PLA Pro data sheet. r/BambuLab 11nz8q3 is PolyLite PLA Pro on an X1C, glossy on the lower section and matte above. The score-9 comment changes outer-wall speed.",
      "brand": "Polymaker",
      "product": "Polymaker PLA Pro",
      "material": "PLA",
      "url": "/brand/polymaker/polymaker-pla-pro",
      "nozzle": "210–230 °C (410–446 °F)",
      "bed": "30–60 °C (86–140 °F)",
      "pricePerKg": null,
      "datasheetUrl": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/TDS_Polymaker_PLA_Pro_v6.0_2026-01-26_EN.pdf",
      "affiliateUrl": null
    },
    {
      "rank": 3,
      "note": "Polymaker PLA lists a nozzle of 190–230 °C (374–446 °F) and a bed of 50–70 °C (122–158 °F) in the Open Filament Database. r/prusa3d 1107u40 asks about printing an enclosure in Polymaker PLA Pro. The score-27 comment printed enclosure parts in black PLA and reports no issues three years later, below 100f.",
      "brand": "Polymaker",
      "product": "PLA",
      "material": "PLA",
      "url": "/brand/polymaker/pla",
      "nozzle": "190–230 °C (374–446 °F)",
      "bed": "50–70 °C (122–158 °F)",
      "pricePerKg": null,
      "datasheetUrl": null,
      "affiliateUrl": null
    }
  ]
}