{
  "opening": "These ranked rows list 190–240 °C (374–464 °F).",
  "question": "Is Overture filament good?",
  "slug": "brand_overture",
  "useCase": "troubleshooting",
  "useCaseLabel": "Troubleshooting",
  "updated": "2026-10-17",
  "shortAnswer": "Overture PLA, PLA Plus, and PETG have ordinary catalog ranges, and these threads blame setup, top-layer speed, TPU speed, a partial clog, or drying, not a bad brand. The Ender 3 failure is a nozzle floating above the plate.",
  "recommendedMaterials": [
    "pla",
    "pla-plus",
    "petg",
    "tpu"
  ],
  "printerConsiderations": [
    "On r/3Dprinting 1ujd6x8 the title is an Ender 3 with Overture PLA. A score-38 comment says the printer has to be set up and calls the result user error. Another score-38 comment says the nozzle is floating far above the plate and suspects the Z endstop.",
    "On r/BambuLab 16n0nja Overture matte PLA shines on the top layer only, after profiles from Bambu, Overture, and a custom calibration, printed between 190–200°. A score-20 comment says speed is the main driver of matte versus shiny finish.",
    "On r/ender3 107yikr none of the Overture TPU temperatures the poster tried looked right. The retrieved comments say 15 mm/s, and 15–25 mm/s at most. The catalog row has no print speed."
  ],
  "pros": [
    "PLA, matte PLA, PLA Plus, and TPU each keep the range stored on that row.",
    "The Z-offset thread is not converted into a brand defect."
  ],
  "cons": [
    "Overture PETG lists 220–250 °C (428–482 °F) and 70–90 °C (158–194 °F), and none of these five threads is an Overture PETG print, so PETG is catalog context only.",
    "120 °F for 8 hours is the poster's drying attempt. It is not a drying specification on the PLA Plus row."
  ],
  "community": "r/3Dprinting 1ujd6x8 is an Ender 3 running Overture PLA. The leading comments say the machine was not set up and that the nozzle is far too high. r/BambuLab 16n0nja is Overture matte PLA with shine on the top layer after days of calibration, printed between 190–200°. A comment points at speed. r/ender3 107yikr is Overture TPU across the poster's full temperature range. Comments say slow the print to 15 mm/s or stay at 15–25 mm/s. r/FixMyPrint ul3umr is thin walls drooping in Overture filament less than a month old on an Artillery Sidewinder X1. The leading comment suggests a partial clog. Another asks if the part-cooling fan is working. r/FixMyPrint 10p65cm dried Overture PLA+ for 8 hours at 120 °F and still had stringing. One comment says wet filament strings and that eight hours should have shown an effect if water was the cause. Another comment says stringing is retraction.",
  "related": [
    "cheap",
    "brand_esun",
    "filament_quality",
    "stringing",
    "drying",
    "flex"
  ],
  "faq": [
    {
      "q": "What nozzle does Overture Matte PLA list?",
      "a": "190–230 °C (374–446 °F), with a bed of 50–70 °C (122–158 °F), the same window as Overture PLA. The shine post printed between 190–200°. A comment on r/BambuLab 16n0nja says speed drives the matte surface."
    },
    {
      "q": "How fast does the catalog say to print Overture TPU?",
      "a": "It does not. Overture TPU lists a nozzle of 210–240 °C (410–464 °F) and a bed of 30–60 °C (86–140 °F), and print speed is blank. Comments on r/ender3 107yikr say 15 mm/s and a maximum of 15–25 mm/s. Those speeds are the comments. The flexible-filament guide is the TPU page."
    }
  ],
  "sources": [
    {
      "title": "Overture brand site",
      "url": "https://overture3d.com/",
      "kind": "manufacturer"
    },
    {
      "title": "Open Filament Database, Overture PLA",
      "url": "https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/pla/index.json",
      "kind": "other"
    },
    {
      "title": "Open Filament Database, Overture Matte PLA",
      "url": "https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/matte_pla/index.json",
      "kind": "other"
    },
    {
      "title": "Open Filament Database, Overture PLA Plus",
      "url": "https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/pla_plus/index.json",
      "kind": "other"
    },
    {
      "title": "Open Filament Database, Overture TPU",
      "url": "https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/TPU/filaments/tpu/index.json",
      "kind": "other"
    },
    {
      "title": "Open Filament Database, Overture PETG",
      "url": "https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PETG/filaments/petg/index.json",
      "kind": "other"
    },
    {
      "title": "Community source, r/3Dprinting 1ujd6x8",
      "url": "https://www.reddit.com/r/3Dprinting/comments/1ujd6x8/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/BambuLab 16n0nja",
      "url": "https://www.reddit.com/r/BambuLab/comments/16n0nja/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/ender3 107yikr",
      "url": "https://www.reddit.com/r/ender3/comments/107yikr/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/FixMyPrint ul3umr",
      "url": "https://www.reddit.com/r/FixMyPrint/comments/ul3umr/",
      "kind": "reddit"
    },
    {
      "title": "Community source, r/FixMyPrint 10p65cm",
      "url": "https://www.reddit.com/r/FixMyPrint/comments/10p65cm/",
      "kind": "reddit"
    }
  ],
  "recommendations": [
    {
      "rank": 1,
      "note": "Overture PLA lists a nozzle of 190–230 °C (374–446 °F) and a bed of 50–70 °C (122–158 °F) in the Open Filament Database. The Ender 3 thread names Overture PLA and the comments talk about Z offset, not a new nozzle range.",
      "brand": "Overture",
      "product": "PLA",
      "material": "PLA",
      "url": "/brand/overture/pla",
      "nozzle": "190–220 °C (374–428 °F)",
      "bed": "25–60 °C (77–140 °F)",
      "pricePerKg": null,
      "datasheetUrl": null,
      "affiliateUrl": null
    },
    {
      "rank": 2,
      "note": "Overture Matte PLA lists the same nozzle, 190–230 °C (374–446 °F), and the same bed, 50–70 °C (122–158 °F). The shine thread says the poster printed between 190–200°, which is the bottom of this nozzle.",
      "brand": "Overture",
      "product": "Matte PLA",
      "material": "PLA",
      "url": "/brand/overture/matte-pla",
      "nozzle": "190–230 °C (374–446 °F)",
      "bed": "50–70 °C (122–158 °F)",
      "pricePerKg": null,
      "datasheetUrl": null,
      "affiliateUrl": null
    },
    {
      "rank": 3,
      "note": "Overture PLA Plus lists a nozzle of 190–230 °C (374–446 °F) and a bed of 35–60 °C (95–140 °F). Drying is not stored. The stringing post dried PLA+ for 8 hours at 120 °F and still had strings.",
      "brand": "Overture",
      "product": "PLA Plus",
      "material": "PLA+",
      "url": "/brand/overture/pla-plus",
      "nozzle": "190–230 °C (374–446 °F)",
      "bed": "35–60 °C (95–140 °F)",
      "pricePerKg": null,
      "datasheetUrl": null,
      "affiliateUrl": null
    },
    {
      "rank": 4,
      "note": "Overture TPU lists a nozzle of 210–240 °C (410–464 °F) and a bed of 30–60 °C (86–140 °F). Print speed is not stored. Comments on the TPU thread say 15 mm/s and 15–25 mm/s at most.",
      "brand": "Overture",
      "product": "TPU",
      "material": "TPU",
      "url": "/brand/overture/tpu",
      "nozzle": "210–240 °C (410–464 °F)",
      "bed": "35–50 °C (95–122 °F)",
      "pricePerKg": null,
      "datasheetUrl": null,
      "affiliateUrl": null
    }
  ]
}